Custom DTF - Upload a Gang Sheet

DTF gang sheets are a staple for the reseller or high-volume shirt distributor/retailer. Take full advantage of the linear foot pricing by fitting your designs into every nook and cranny of your gang sheet.  The more you can fit, the cheaper your per item costs are.

This product is for uploading gang sheets you have created already. Upload your gang sheet and select the quantity you need of that sheet.

This product is not for adding single files needing to be put onto a gang sheet. If you do not have a gang sheet already created, check out our gang sheet builder here: BAGS

For the fastest turnaround time possible, please ensure that your file is sized to match your order and that the file you submit is a 300 DPI PNG with a transparent background. Unlike many sites today, we will review your file before we print. If we think there might be an issue with an unexpected background, image size or spacing we will email you prior to printing. If you are on a tight deadline (aren't we all!) let us know so that we make sure to expedite communication if an issue is identified.

Check out our detailed TAT information here. We offer two pickup locations as well as shipping via USPS and UPS. Pickup location and shipping options can be selected at checkout.

While all custom items are non-refundable, please let us know if you are unsatisfied with the products you receive. We will do our best to resolve all issues.

Total length of your gang sheet will vary but minimum length will be as ordered. Actual film width is 23.5" with a 22.75" printable width. To ensure quality and keep shipping costs down, gang sheets may be partially or fully broken down prior to shipping.

We use a combination of ink and film that produces a hot peel film transfer. However, many factors can impact how well the film performs while hot (including design, fabric, pressing time and temp).

Our basic recommendation for applying our transfers is to press at 300F for 10 seconds at medium to high pressure, then allow to cool until the film releases when you lightly lift it at a corner. This can be sped up by applying compressed air or raising the garment to allow air to flow over and under it (shake it out). Once peeled, complete a second press at the same time, pressure and temp to ensure the transfer is fully seated into the fabric. You can use parchment paper, an old t shirt or other finishing papers as you desire.

Different fabric types will require different temperature settings to avoid scorching. We have tested our transfers as low as 240F. When working with sensitive fabrics, it is recommended to start low and work your way up to find a temperature and time that will provide adequate adhesion.

As a general rule of thumb, pressure is more important than temperature when it comes to a long lasting transfer. Because of this, the use of hand held presses is not recommended. Presses that list for less than $500 should be evaluated to ensure you are getting adequate pressure and consistent temperature across the transfer.

Transfers on film should be stored in a cool, dry location. Care should be taken to avoid damaging the ink/adhesive.

As with all heat applied transfers, decorated apparel should be washed in cool water and dried on a low setting (inside out). Care should be taken to avoid additives such as fabric softeners and bleach. Heat and additives can significantly impact the longevity of the transfer.